Volcano Box Tool V 2.7.7 Update Download Mediafire

VolcanoBox2.7.7 SPD Android, MTK Android, Adb Root & Much More !!

what's new ?

Adjust to write flash for SPD 6820/8810 phones.

Support new flashes for MTK 6572/6582 android phones.

Support new phones for Adb Root.

Support new flashes for SPD 6820/8810 android phones.

Keep in mind this update is also based on previous update so it's very Exclusive Please have a test and let us know if you got any problems. 

DOWNLOAD NOW

Read More

Galaxy Star Pro Dous GT-S7262 Flash CWM Recovery & Root

 SAMSUNG S7262  How To Root And CWM Flash

Samsung Galaxy Star Pro Duos is a low range dual SIM smartphone from Samsung, some devices are rooted directly and only rooting dont fully customize an Android device, thats why we are now Flashing/Installing a custom Recovery so that we can root Samsung Galaxy Star Pro Duos and also Flash Custom ROMs. 

Before You Begin: (must do)

1. Drivers should be properly installed on your PC, if not so go to: Samsung USB Drivers.

Samsung Andorid USB Driver for Windows | SAMSUNG Developers

Downloads:

1. Recovery.tar

Zippyshare.com - recovery.tar

2. Odin

https://docs.google.com/uc?export=download&id=0BxzKWBQ99T28SlR1bUcweVhVS3c

Flashing Recovery:

1. Download the above both files.

2. Extract the Odin zip file.

3. Open the Odin

4. Turn off your device.

5. Turn it on in download mode by pressing Volume Down + Power Button + Home Button at the same time, dont leave buttons until a Warning screen appears, leave the buttons when Warning screen appears, and then press Volume Up button to continue to Download Mode.

6. Connect Your device to PC via USB Cable.

7. Added! message will be shown in message box of Odin.

8. Now in Odin click on PDA and choose the Recovery.tar zip file.

9. Then click Start. Your device will be flashed with a custom recovery.

To go into Recovery Mode, Press and hold Volume Up + Home Button + Power Button at the same time, you will see phone starts in Recovery Mode.

Read More

How to flash Samsung S Dous S7562 By Odin Download

Firmware Flashing Steps:

- Turn your phone off and remove Sim and Memory Card from it.

- Run Odin program and check the following options:

Auto Reboot - F.Reset Time

- From the Extracted Firmware package you have to select files in the following order to use in Odin program:

Bootloader: BOATLOADER_S7562xxxxxx_...REV02_user_low_noship.ta r.md5
PDA: CODE_S7562xxxxxx_...REV02_user_low_noship.tar.md5
PHONE: MODEM_S7562xxxxxx_...REV02_user_low_noship.tar.md5
CSC: CSC_Oxx_S7562xxxxxx_...REV02_user_low_noship.tar.m d5

- Now put the phone into Download Mode: Press Volume Down key + Home Key + Power Key.

- After you see the Warning message press Volume Up Key to enter Download Mode.

- Connect the phone to your PC via USB cable.

- If your PC starts installing drivers then wait till it is finished.

- Look at Odin's window and make sure it detects the Com port that your phone takes:

If the phone's drivers is installed correctly you will see 0:[COMxx] when xx is the com port number so everything is OK.

- Click Start button to let Odin downloads the selected firmware files into your phone.

- During the update process it is very risky to stop the program or remove USB cable from phone so let it done without any interruption.

- When the update process is done the phone will be rebooted.

- If you see PASS! word at Odin's window then the update was successful.

- Disconnect your phone and wait till it is fully on.

- It is better to do Full Reset by this Code: *2767*3855# and let the phone rebooted.

FIRMWARE  Android 4.0.4   DOWNLOAD 

FLASH TOOL ODIN    DOWNLOAD

Read More